The use of lubricants for ball screws is a very important issue. Lubrication can improve wear resistance and transmission efficiency. Before using the lubricating oil, please confirm the condition of the lubricating oil. If the lubrication is not good, the function of the ball screw will soon be lost.
When applying grease, it can be used directly. However, during use, if there is dust or powdery debris on the surface of the grease, please wash it with clean white kerosene, and then reapply the same new grease as the original grease. Mixing greases of different properties should be avoided.
After the inspection is put into use for 2 to 3 months, if there are large stains, the old lubricant on the product should be wiped clean, and then new lubricant should be applied. After that, the grease and lubricant replacement cycle should be checked regularly, usually one year, but the appropriate cycle interval should be set according to the use environment.
Replace the grease on the ball screw every six months, clean the old grease, and apply new grease. The screw rod can be lubricated with oil before each machine works.
The screw rod has been lubricated before leaving the factory, but if it is stored for a long time, please coat it with anti-rust oil. Because the anti-rust oil is not lubricated, the oil of the ball screw should be washed away for a long time before use, and clean and lubricated in conjunction with kerosene.
